Optional specifications |
Alarm |
Output 160 × 80 size T1~T3 1-3 point alarm relay output, both normally open and normally closed dual contact 250V AC/3A |
Resistive load |
96 x 96 size T1~T2 1-2 point alarm relay output, both normally open and normally closed dual contacts |
T3 3-point alarm relay output, all single normally open contacts |
96 × 48 size T3 3-point alarm relay output, single normally open contact |
72 x 72 size T1~T2 1-2 point alarm relay output, 1 point normally open+normally closed dual contact; 1-point normally open contact |
T3 3-point alarm relay output, 1 point is normally open+normally closed dual contact, and the other 2 points are single normally open contacts |
48 x 48 size T1 1-point alarm relay output, all single normally open contacts |
control |
Output CA1 current output (4-20) mA, (0-20) mA |
CA2 voltage output (0-5) V, (1-5) V |
CA3 voltage output (0-10) V |
CR relay output (single normally open) (250V AC/3A) |
CQ controlled solid-state relay output (SSR) (12V DC/21mA) |
Analog output A1 current output (4-20) mA, (0-10) mA, (0-20) mA photoelectric isolation, |
Resolution: 1/10000, load capacity: 600 Ω |
A2 voltage output (0-5) V, (1-5) V |
A3 voltage output (0-10) V |
communication |
Interface MS1 RS232C interface photoelectric isolation, |
Response time: less than 500 μ S (measured value) |
Communication protocol selected through software |
(TCASCII or Modbus RTU) |
MS2 RS485 interface |
External supply |
Power supply B1 24V ± 5% below 50mA |
Optional specifications for B2 12V ± 5% below 50mA |
Power frequency with an allowed interruption time of less than 1 week |