| After-sales Service: | Following Updating |
|---|---|
| Warranty: | Under Discussion |
| Transport Package: | Wooden Box |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Basic specifications |
| Power supply voltage: 10~30VDC |
| Power consumption: less than 4.8W |
| Environmental temperature: -10~55 ºC (storage: -25~65 ºC) |
| Environmental humidity: 35~85% RH, no condensation |
| Absolute humidity: MAX. W. C 29.3 g/m3 dry air at 101.3 kPa |
| Installation location: indoor, height < 2000m |
| Insulation resistance: ≥ 100M Ω (500V DC MEGA reference) |
| Insulation strength: 1000V AC (test conditions: 50/60Hz, 1 minute) |
| Anti interference: IEC61000-4-2 (electrostatic discharge), Class III |
| Input specifications |
| Input: Thermocouple, thermistor, DC current/voltage input, input signal set by parameters. Please refer to [Input Signal] for details. |
| Isolation: Input and output, feeding, isolator power supply isolation. |
| Conversion cycle: 0.1 seconds (thermocouple input is 0.2 seconds) |
| Basic error: ± 0.2% F • S |
| When selecting a B-type thermocouple as the input signal, accuracy is not guaranteed below 250 ºC. |
| Cold end compensation accuracy: related to the method of cold end compensation, thermal balance at the terminals, and cold end compensation coefficient. |
| Feed specifications |
| 24V ± 5% below 50mA |
| Feed and input, output, and isolator power supply isolation |
| Output specifications |
| 801 configuration with 1 output channel |
| 821 configuration with 2 outputs, isolated between the two outputs |
| Optoelectronic isolation, resolution: 1/10000, load capacity: 600 Ω |
| The output signal is set by parameters, please refer to [Output] for details |
| Output and input, feeding, isolator power supply isolation |
){kind=link}