Product Description:
AD-S321-III weighing analogue-to-digital converter module with 24V power supply and housing with guide rails for easy installation. It is used in the manufacture of digital load cells, weighing indicators, process control instruments, tensile testing machines, and is suitable for other measurement occasions such as weighing and mechanical strength tests.
Product technical parameters:
1.Measuring signal range:±30mV; |
2. Resolution: 1 million original code; |
3.Shell with guide rail, easy to install; |
4.Temperature coefficient: ≤5ppm/°C (typical); |
5.RS485 half-duplex interface, free port protocol / Modbus RTU protocol; |
6. Bare board size (length × width × height, mm): 112 × 100 × 23; |
7. With analogue-to-digital conversion, digital calibration, tare, zero setting, zero tracking, power-on zero setting, anti-jitter and other functions; |
8. All setting work is done through the serial port; |
9. Module address can be set (0 ~ 31), can be expanded to bus communication; |
10. Baud rate, parity bit selectable (1200 ~ 38400bps), data output format selectable; |
11. Digital filtering: standard or low-pass filtering mode and related parameters can be set; |
12. Measurement sampling rate can be selected, the range of 3.125 ~ 400Hz; |
13. Non-volatile storage of characteristic parameters, parameters are still saved after power failure; |
14.Operating voltage: 24V DC power supply; operating current ≤ 40mA; |
15. Comprehensive protection functions: anti-reverse connection, anti-overvoltage, instantaneous suppression and other multiple protection; |
16. Use temperature range: -40 ºC ~ +70 ºC; storage temperature range: -60 ºC ~ +90 ºC. |