Bridge resistance:
measuring range ≤ 0 ... 50 N
500 Ω, nominal*
measuring range
≥ 0 ...100 N
350 Ω, nominal*
Excitation:
5 V DC
Nominal sensitivity:
measuring range ≤ 0 ... 50 N 5 ... 30 mV/V, nominal*
measuring range ≥ 0 ...100 N
0.8 mV/V, nominal*
Insulation resistance:
> 10 MΩ
Deviations from the stated value are possible.
Nominal temperature range:
measuring range ≤ 0 ... 50 N
+ 15 °C ... + 60 °C
measuring range
≥ 0 ...100 N
+ 15 °C ... + 70 °C
Operating temperature:
0 °C ... + 80 °C
Influence of temperature on zero:
measuring range ≤ 0 ... 50 N
≤ ± 0.5 % F.S./10 K
measuring range ≥ 0 ...100 N
≤ ± 0.3 % F.S./10 K
Influence of temperature on sensitivity:
measuring range ≤ 0 ... 50 N
≤ ± 0.5 % Rdg./10 K
measuring range ≥ 0 ...100 N
≤ ± 0.3 % Rdg./10 K
Non-linearity:
< 0.5 % F.S.
Hysteresis:
0.25 % F.S.
Non-repeatability on unchanged mounting position: < 0.1 % F.S.
Deflection:
approx. 20 µm
Static overload safe:
150 % of capacity
Dynamic performance:
recommended
50 % of capacity
maximum
70 % of capacity
Material:
High-grade stainless steel 1.4542
Electrical connection:
Measuring range ≤ 0 ... 50 N shielded, TPE coated cable with bare
ends for soldering, length approx. 2 m, bending radius ≥ 30 mm;
circuit board (70 x 8 mm) with balancing resistors 30 cm away
from the cable's end
Measuring range ≤ 0 ... 100 N shielded, dragchain TPE coated
cable with bare ends for soldering, length approx. 2 m, bending
radius ≥ 10 mm
Protection class: acc. to EN 60529
IP54
Wiring code:
white
excitation voltage
positive
brown
excitation voltage
negative
yellow
signal output
positive
green
signal output
negative
Dimensions:
refer to table and scale drawing
General tolerance of dimensioning:
acc. to ISO 2768-f
Weight:
approx. 10 g without cable
){kind=link}