| After-sales Service: | Following Updating |
|---|---|
| Warranty: | Under Discussion |
| Color: | Black |
| Working Power Supply: | Adh:AC/DC 85-265V Adl:DC 24V |
| Temperature: | -10~65 |
| Relative Humidity: | 20~90%(No Condensation) |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier | 1.Measurement Load cell signal 0~1.0/~2.0/~4.0/~10.0/~20.0/~40.0mV/V (specified). |
| 2. With on-site calibration function, it can be used with on-site load cell to do zero point and full scale point calibration, which can save the time of test run. |
| 3. With operation panel, easy to set various functions on site; display range: -19999~29999 |
| 4. Up to one set of RS485 output, one set of analog output and one set of relay output or power supply output. |
| 5. Analog output, 0~10V or 0(4)~20mA output can be selected by dip switch. |
| 6. Relay output, action mode (Hi/Lo), action gap, action and reset delay can be set. |
| 7.RS 485 Modbus RTU mode communication rate up to 38400bps. |
| Characterization | Inputs/outputs can be customized, and the series are equipped with adjustable display and alarm functions, as well as modifiable zero/gain values (Span). |
| precision | ±0.1%RO |
| Measurement Range | 0.01Hz~100KHz selectable |
| Applied Voltage | DC 12V,30mA Maximun |
| Display Range | 0.28" high brightness red LED 4-digit -1999~9999Counts, display range can be modified |
| Scope of adjustment | Digital push-button adjustment |
| Insulation Impedance | >=100MΩ/DC500V |
| Setting Function | High alarm or low alarm type, user can set it by themselves, each alarm contact has a LED light when it is activated |
| Setting range | -1999~9999 Counts adjustable |
| No action band | 0~9999 Counts adjustable |
| Delay Time | 0~9999 seconds adjustable |
| Contact Capacity | SPDT or SPST: AC250V2A, DC24VA. |
| Isolation Capability | AC1600V/min. between input/output/power supply |
| Analog output capacity | Current Output:<=500Ω at 20mA output, Voltage Output:10mA Maximum |
| Digital Output Capability | Adopt RS-485 output, transmission speed 1200,2400,4800,9600,19200,38400Baud Rate can be selected by yourself. |
| Linearity and re-linearity | <=0.1% |
| Long term stability | Annual drift <=0.2% |
| Response Rate/Ripple | <=1sec, <=0.1%rms RO |
| Temperature Coefficient | <=80ppm/°C From 0~60°C, <=50ppm/25°C±5°C |
| Operating Environment | -10°C~+65°C, 20~90%RH without condensation, Storage condition:-20°C~+75°C, 20~90%RH without condensation |
| Working power supply | Auxiliary power supply AC/DC 85~265V 45~70Hz, <=5VA, DC 20~28V |
| Shell Material | Non-flammable ABS injection molding |
| Installation | Rail mounted.DIN RAIL 35mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}