Product Description:
AD-S321/324-II weighing AD converter module suitable for industrial field power supply (24V DC) weighing AD converter module with direct module address setting via dip switches. It is used in the manufacture of digital load cells, weighing indicators, process control instruments, tensile testing machines, and is suitable for other measurement occasions such as weighing and mechanical strength tests.
Product technical parameters:
1. Suitable for industrial field power supply (24V DC, same as general PLC power supply); |
2.Measuring signal range:±30mV; |
3. Resolution: 1 million original code; |
4.Temperature coefficient: ≤ 5ppm / ºC (typical); |
5. RS485 half-duplex interface, free port protocols; |
6. Bare board size (L×W×H, mm): 86×55×18; |
7. With analogue-to-digital conversion, digital calibration, tare, zero setting, zero tracking, power-on zero setting, anti-jitter and other functions; |
8. All setting work is done through the serial port; |
9. Module address can be set (0 ~ 31), can be expanded to bus communication; |
10. Baud rate, parity bit selectable (1200 ~ 38400bps), data output format selectable; |
11. Digital filtering: standard or low-pass filtering mode and related parameters can be set; |
12. Measurement sampling rate can be selected, the range of 3.125 ~ 400Hz; |
13. Characteristic parameters non-volatile storage, power failure parameters are still saved; |
14. Operating voltage: 24V DC power supply (can be changed to 6.5-12V DC power supply); operating current ≤ 40mA; |
15. Comprehensive protection functions: anti-reverse connection, anti-overvoltage, instantaneous suppression and other multiple protection; |
16.Temperature range: -40ºC~+70ºC; Storage temperature range: -60ºC~+90ºC. |