After-sales Service: | Following Updating |
---|---|
Warranty: | Under Discussion |
Switching Power Supply: | AC90~260V 50Hz(60Hz)Plus and Minus2% |
Still deciding? Get samples of US$ 650/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.20-channel switching input and output control (8 in/12 out), output port position can be customized; |
2.Full-automatic three material speed (fast/medium/slow) filling control; |
3.Two filling modes: gross weight and net weight; |
4.Automatic tare and tare detection function; |
5.Dual serial ports for external serial printer, computer or second monitor (this function requires optional SIO expansion board). |
General Specifications | Switching Power Supply | AC90~260V 50Hz(60Hz)±2% |
Operating Temperature | -10~40ºC | |
Maximum humidity | 90%R.H No condensation | |
Calibration standard | class3 3000e,1μV/d | |
Protection Grade | Front panel IP65 | |
Power Consumption | Approx. 15W | |
A/D Conversion | A/D performance | 24-bit Sigma-Delta |
A/D conversion speed | 120/240/480/960 times/second adjustable | |
Non-linearity | 0.01%F.S | |
Gain Drift | 10PPM/°C | |
Input Sensitivity | 0.5μV/d | |
Input Range | 0~27mV | |
Maximum Display Accuracy | 1/100000 | |
Sensor power supply | DC12V Single drive 8 x 350Ω sensors | |
Input Impedance | 10MΩ | |
Zero Adjustment Range | 0.2~20mV (when sensor is 2mV/V) | |
I/O section | Inputs | Input port 8, low level active |
Start/stop/clear zero/clear alarm/select recipe/tare/fill start/manual small pitch/print/keypad lock/up and down material level/manual refill once | ||
Outputs | 12 output ports, single drive current 500mA | |
Run/Stop/Large-Medium-Small Pitch/Fixed Value/Over Difference/Alarm/Push Drum/Zero Zone/Feed/Batch Finish/Missing Material/Lift Gun | ||
Communication expansion board | Optional | RS232+RS485/RS232 |