| After-sales Service: | Following Updating |
|---|---|
| Warranty: | Under Discussion |
| Transport Package: | Wooden Box |
| Specification: | 145*92*40 |
| Trademark: | Sun-Moon |
| Origin: | China |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier | specifications |
| Power supply voltage DC power supply 10-24V AC 50/60 Hz; 10-24V DC |
| Power consumption of DC power supply 102C series: less than 3.6W, typical value: 1.8W (carrying one sensor) |
| 101C series: less than 5W |
| The allowable voltage variation range is 90%~110% of the power supply voltage |
| Insulation resistance ≥ 100M Ω (500V DC MEGA reference) |
| Insulation strength 2000V AC (test conditions: 50/60Hz, 1 minute) |
| Anti interference IEC61000-4-2 (electrostatic discharge), Class III |
| IEC61000-4-4 (Electrical Fast Transient Pulse Group), Class III |
| IEC61000-4-5 (surge), Class III |
| Protection level IP65 (product front panel protection) (GB/T42-2008) |
| Operating environment temperature -10~50 ºC |
| Environmental humidity of 35-85% R • H, no condensation |
| Installation location indoor, height < 2000m |
| Input specifications |
| Sensor power supply DC 5V ± 2%, 100mA (MAX) |
| If 200mA (MAX) is required, please indicate in advance when placing an order |
| Input impedance>10M Ω |
| Zero adjustment range -10~12mV |
| Gain input range 1-12 mV |
| Conversion method Sigma Delta |
| Measurement and control speeds of 15, 120, and 240 times/second (through parameter settings) |
| Nonlinear ± 0.05% F • S (measurement and control 15bps) |
| (When measuring speed at 120 or 240 times per second, non-linear error will increase) |
| Gain drift<10 ppm/ºC |
| (When connecting sensors, matching terminal connectors must be used, otherwise it will deteriorate the temperature drift characteristics.) |
| Measurement range -199999~999999, decimal point position can be set |
| Measurement resolution 1/100000 |
| Input signal 102C series: proportional measurement, equipped with a four wire strain sensor |
| 101C series: Proportional measurement, equipped with six wire strain sensors |
| Contact input 1 external switch input, which can be used to reset to zero |
| Output specifications |
| Comparison output 2-point OC gate output, ≤ 30mA |
| Optional specifications |
| Analog output A1 current output (4-20) mA, (0-10) mA, (0-20) mA photoelectric isolation, resolution: 1/12000, load capacity: 600 Ω |
| A2 voltage output (1-5) V, (0-5) V |
| A3 voltage output 0-10V |
| A4 voltage output ± 5V |
| A5 voltage output ± 10V |
| Communication interface MS1 RS232 interface, Modbus RTU and TC ASCII protocol 102C series non isolated |
| Response time: 500 μ S (measured value) |
| MS2 RS485 interface, Modbus RTU and TC ASCII protocol |
| Intelligent module TS intelligent module optional specifications optional specifications |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}