Product Description:
Temperature signal converter is a device that converts temperature signals into standard electrical output signals, which can convert temperature signals collected by sensors, thermocouples or infrared thermometers into analog voltages, current signals and so on, for use in PLC, DCS, display instruments and other systems.
Product Parameters:
precision |
±0.2%RO |
Input Type |
2-wire or 3-wire |
Insulation Impedance |
>=100MΩ/DC500V |
Output Capability |
Current output<=500Ω at 20mA output, Voltage output:10mA Maximum |
Isolation Capability |
AC1600V/min. between input/output/power supply |
Output Protection |
Input and output open or short circuit without damage |
Linearity and re-linearity |
<=0.1% |
Long term stability |
Annual drift <=0.2% |
Adjustment range |
SPAN and ZERO ±10%. |
Response Rate/Ripple |
<=400mS/<=0.1%rms RO |
Temperature Coefficient |
<=80ppm/°C From 0~60°C, <=50ppm/25°C±5°C |
Operating Environment |
-10°C~+65°C, 20~90%RH without condensation, Storage condition:-20°C~+75°C, 20~90%RH without condensation |
Working power supply |
Auxiliary power supply AC/DC 85~265V 45~70Hz, <=5VA, DC 20~28V |
Shell Material |
Non-flammable ABS injection molding |
Installation |
Rail mounted.DIN RAIL 35mm |