Wb-120 Curved Plate Type High-Speed Pre-Check Weighing System

• After-sales Service: Following Updating
• Warranty: Under Discussion
• Accuracy: ＜±20g
• Model NO.: SM-WB-120
• Check Weight Range: >20000g
• Application Area: Non-standard Automation System
• Type: Check Weigher Combination
• Touch Screen: Without Touch Screen
• Sorting Method: Lever
• Speed Range: 0~120km/H
• Detection Accuracy: Total Weight Error ≤7%
• Detection Standard: GB/T21296-2007 10 Level
• Load Capacity: Axle Load 30 Tonnes, Overload Capacity 200%
• Bending Plate Sensor Protection Grade: IP68
• Installation Mode: Road Surface Shallow Surface Inlay Installation, E
• Output Detection Information: Axle Weight, Total Weight, Vehicle Speed, Number O
• Transport Package: Wooden Box
• Specification: customisable
• Trademark: Sun-Moon
• Origin: China
• HS Code: 9031809090
• Production Capacity: 300, 000pieces/Year

Product Description

Product Description:

   Bending Plate Vehicle Weighing Systems are high-tech devices that use a bending plate load cell as a sensitive element to measure the mass of a moving vehicle. Due to the low dead weight and fast response time of the bending plate load cell, it is possible to measure the mass of a moving vehicle up to a maximum speed of 200 km/h. Installation is extremely easy as only a 70*40 cross-section trench needs to be cut, and once installed it blends in with the road surface and is virtually maintenance free.

Product system components :

 

1. Bend plate sensors	2-4 per lane.
2. Data Acquisition Controller	Receive the weighing signal from the curved plate sensor and analyse the data after high-speed sampling to form the weighing information such as wheel weight and send it to the computer for processing. to the computer for processing.
3. Main control computer	Receive data from data acquisition controller, comprehensively analyse and form multi-lane vehicle weight, licence plate, speed and other information, combined with law enforcement software to form a complete system. The company provides users with dynamic link library (.dll) form. Each .dll file corresponds to one controller.

Product technical parameters:

 

1. Accuracy level:	5 levels for the whole vehicle, depending on the number of sensors.
2. Sensors that can be connected to the controller:	Maximum number 8
3.Test speed:	1-200km/h (Theoretical value. Due to the limitations of road conditions, the actual maximum speed of measurement to be achieved by the measurement of technical departments of the test report shall prevail. Vehicle speed changes when passing the vehicle will cause additional errors in the equivalent amount, so too low a test speed (such as (10km / h) will not be able to ensure that the allowable speed and thus cause a large error.)
4. Maximum weighing capacity (axle weight):	30 tonnes
5.Minimum weighing capacity:	1000kg
6.Graduated value:	100kg
7.Rated working temperature:	-10ºC--40ºC
8.Power supply:	AC220V/50HZ
9.Execution standard:	GB/T21296-2007 (because the system does not allow static weighing, GB/T21296-2007 standard in the following terms and corresponding test methods are not suitable for this system: 5.1.4, 5.1.12, 5.1.13, 5.2.4, 5.2.10, 5.2.11)

Product Application Diagram:


Cooperation case: