Sm-Jcyc Tuning Fork Liquid Level Switch

• After-sales Service: Following Updating
• Warranty: Under Discussion
• Pressure Range: ≦2MPa
• Shell Material: Die-Casting Aluminum Alloy
• Fork Body Material: 304 Stainless Steel (Optional)
• Electrical Interface: 3/4 "NPT
• Model NO.: SM-JCYC
• Connection Mode: 1" NPT; G3/4; G11/2 Thread
• Transport Package: Wooden Box
• Specification: 20*20*50
• Trademark: Sun-Monon
• Origin: China
• HS Code: 9031809090
• Production Capacity: 300, 000pieces/Year

Product Description

Product Introduction:

The tuning fork liquid level switch is a type of liquid level control switch. The tuning fork is excited by a crystal to produce vibrations. When the tuning fork is immersed in liquid, the vibration frequency changes, which is detected by an electronic circuit and outputs a switch value.
Typical applications: liquid, powder or granular solid level alarm.

 

 

Product Features:

1.Strong adaptability, not affected by medium density and dielectric constant;

2.Foul, agitation, bubbles, vibration, high temperature and other harsh conditions have no impact on detection;

3. No on-site calibration is required for measuring any liquid.

 

dielectric parameter:
 

1.Medium temperature range: -20ºC~220ºC

2.Ambient temperature: -20ºC~80ºC

3.Environmental humidity: ≤95%RH

4.Density of measured medium: solid ≥0.1g/cm3; liquid ≥0.7g/cm3

5.The size of the solid particles being measured: ≤10mm

6.Liquid viscosity: <1000mm2/s

7.Angle of repose of the measured medium: ≥200

8.Pressure range: ≤2MPa

9.Housing material: die-casting aluminum alloy

10.Fork body material: 304 stainless steel (optional)

11.Electrical interface: 3/4″NPT

12.Connection mode: 1" NPT; G3/4; G11/2 thread;

13.Flange (selected by the user)

Electrical parameters:

1. Power supply voltage: DC24V; AC220V 50Hz

2.Relay output: 8A 220V AC

3.DC voltage output: 0 or 5V

4.DC current output: 0 or 10mA

5.Power consumption: ≤2W

6.Vibration frequency of tuning fork: 300±50Hz

7.Environmental vibration level: V.L.4, acceleration not greater than 1g

8.Switch signal action time: 1-60S

9.Protection level: IP67 (optional)

10.Explosion-proof grade: Exia IICT6 (optional)

Application cases:
 

1.Waterworks: detecting water level;

2.Beer starter/beverage factory: detect liquid level;

3.Paper mill: detect pulp level;

4.Glass factory: detecting the level of quartz sand and crushed glass;

5.Oil production plant: detecting the level of gasoline/oil production fluid;

6.Chemical plant: detect the liquid level of chemical materials such as polyester, spandex, acid, alkali, etc.

7.Environmental protection: detect the level of sewage and wastewater;

8.Boiler factory: detect the water level of steam drum and other pressure vessel liquid level

Applicable scenarios: