| After-sales Service: | Following Updating |
|---|---|
| Warranty: | Under Discussion |
| Weighing: | 5000kg |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| specifications |
| Power supply voltage AC power supply 100-240 V AC 50/60 Hz |
| AC/DC power supply 10-24V AC 50/60 Hz; 10-24V DC |
| Power consumption of AC power supply below 7 VA |
| AC/DC power supply AC: below 6 VA; DC: Below 5W |
| The allowable voltage variation range is 90%~110% of the power supply voltage |
| Insulation resistance ≥ 100M Ω (500V DC MEGA reference) |
| Insulation strength 2000V AC (test conditions: 50/60Hz, 1 minute) |
| Anti interference IEC61000-4-2 (electrostatic discharge), Class III |
| IEC61000-4-4 (Electrical Fast Transient Pulse Group), Class III |
| IEC61000-4-5 (surge), Class III |
| Protection level IP65 (product front panel protection) (GB/T42-2008) |
| Operating environment temperature -30~60 ºC (storage: -40~65 ºC) |
| Environmental humidity of 35-85% R • H, no condensation |
| Installation location indoor, height < 2000m |
| Input specifications |
| The measurement and control speed can be set to 10 times/second, 40 times/second, 120 times/second, 200 times/second, or 400 times/second |
| Basic error ± 0.05% F • S |
| Display range -99999~99999 |
| Display specification sheet, 6-digit display, input specification input |
| Optional specifications |
| Contact input K 1 point external input, used for resetting |
| Alarm |
| Output 160 × 80 size T1~T4 1-4 alarm relay outputs, both normally open and normally closed dual contact 250V AC/3A |
| Resistive load |
| 96 × 48 size T1~T2 1-2 point alarm relay output, both normally open and normally closed dual contacts |
| T3 3-point alarm relay output, single normally open contact |
| O alarm selection OC gate output (voltage should be less than 40V DC, current should be less than 40mA), omitting indicates alarm relay output |
| Analog quantity |
| Output A1 current output (4-20) mA, (0-10) mA, (0-20) mA photoelectric isolation, resolution: 1/10000, load capacity: 600 Ω |
| A2 voltage output (0-5) V, (1-5) V |
| A3 voltage output (0-10) V |
| A4 voltage output (-5V~+5V) |
| A5 voltage output (-10V~+10V) |
| Fast analog output F is suitable for analog output with a measurement and control speed of 200 times/second or more |
| External supply |
| Power supply B1 24V ± 5% below 50mA |
| B2 12V ± 5% below 50mA |
| B3 10V ± 5% below 50mA |
| communication |
| Interface S1 RS232 interface (A size only) photoelectric isolation, |
| Response time: less than 500 μ S (measured value) |
| Communication protocol selected through software |
| (TCASCII or Modbus RTU) |
| S2 RS485 interface |
){kind=link}