| After-sales Service: | Following Updating |
|---|---|
| Warranty: | Under Discussion |
| Weighing: | 5000kg |
|
Still deciding? Get samples of US$ 200/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| specifications |
| Power supply voltage AC power supply V0 100-240 V AC 50/60 Hz |
| Power consumption of AC power supply below 8 VA |
| The allowable voltage variation range is 90%~110% of the power supply voltage |
| Insulation resistance ≥ 100M Ω (500V DC MEGA reference) |
| Insulation strength 2000V AC (test conditions: 50/60Hz, 1 minute) |
| Anti interference IEC61000-4-2 (electrostatic discharge), Class III |
| IEC61000-4-4 (Electrical Fast Transient Pulse Group), Class III |
| IEC61000-4-5 (surge), Class III |
| Protection level IP65 (product front panel protection) (GB/T42-2008) |
| Operating environment temperature -10~55 ºC (storage: -25~65 ºC) |
| Environmental humidity of 35-85% R • H, no condensation |
| Installation location indoor, height < 2000m |
| Input specifications |
| Measure control speed of 0.2 seconds per channel |
| Basic error ± 0.2% F • S |
| Display range -99999~99999 |
| 3/4 channels or 4 channels |
| Input signal type: Thermal resistance Pt1000/Pt100/Cu100/Cu50/BA1/BA2/G53 |
| Thermocouple K/S/R/B/N/E/J/T/WR325/WR526 |
| DC current 4-20mA/0-10mA/0-20mA |
| DC voltage 0-5V DC/0-10V DC/1-5V DC |
| Millivolts ± 100mV/± 20mV |
| Remote pressure gauge 40 Ω~370 Ω |
| Smooth filtering (sliding average filtering), digital filtering (inertial filtering), mutation delay filtering |
| Optional accessory specifications |
| Alarm output T0/T2/T4 without relay output/2 normally open and normally closed/4 normally open relay preset output, 250V AC/3A, resistive load |
| Transmission output |
| (Resolution: 1/3000) A1 current output (4-20) mA, (0-10) mA, (0-20) mA, A1A1 for 2 channels |
| A2 voltage output (1-5) V, (0-5) V, A2A2 for 2 channels |
| A3 voltage output (0-10) V, A3A3 for 2 channels |
| Communication interface MS1 RS232 interface, TC ASCII protocol/Modbus RTU protocol |
| MS2 RS485 interface, TC ASCII protocol/Modbus RTU protocol |
| External power supply B1 24V ± 5%, below 50mA |
| B1G 24V ± 5% below 100mA |
| B2 12V ± 5%, below 50mA |
| B2G 12V ± 5% below 100mA |
| B3 precision power supply, generally 10V ± 2%, 30ppm, below 100mA |
){kind=link}