| After-sales Service: | Following Updating |
|---|---|
| Warranty: | Under Discussion |
| Weighing: | 5000kg |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specification |
| Power supply voltage AC power supply 100-240 V AC 50/60 Hz |
| Power consumption of AC power supply below 10W |
| The allowable voltage variation range is 90%~110% of the power supply voltage |
| Insulation resistance ≥ 100M Ω (500V DC MEGA reference) |
| Insulation strength 2000V AC (test conditions: 50/60Hz, 1 minute) |
| Anti interference IEC61000-4-2 (electrostatic discharge), Class III |
| IEC61000-4-4 (Electrical Fast Transient Pulse Group), Class III |
| IEC61000-4-5 (surge), Class III |
| Protection level 160 × 84 size instrument: IP65 (product front panel protection) (GB/T42-2008) |
| Operating environment temperature -10~55 ºC (storage: -25~65 ºC) |
| Environmental humidity of 35-85% R • H, no condensation |
| Installation location indoor, height < 2000m |
| Input specifications |
| Sensor power supply DC 10V ± 2%, 200mA (MAX) |
| Input impedance>10M Ω |
| Conversion method Sigma Delta |
| Measurement and control speed 10 times/second or 80 times/second (through parameter settings) |
| Nonlinear 0.01% F • S |
| Gain drift<10 ppm/ºC |
| Maximum display accuracy of 1/100000 |
| Input signal proportional measurement, equipped with a 4-wire strain sensor |
| Contact input 1 external switch input, which can be used for clearing, peeling, allowing comparison output, etc |
| Optional specifications |
| Compare the output R2 96 × 49.5 size of the instrument, and choose to install a 2-point relay output, 250V AC/3A |
| Resistive load |
| R4/R8 160 × 84 size instrument, optional 4/8 point relay output, |
| Analog output A1 current output (4-20) mA, (0-10) mA, (0-20) mA photoelectric isolation, resolution: 1/3000, load capacity: 600 Ω |
| A2 voltage output (1-5) V, (0-5) V |
| A3 voltage output (0-10) V |
| A4 voltage output (± 5) V |
| A5 voltage output (± 10) V |
| Communication interface S1 RS232 interface, TC ASCII protocol optoelectronic isolation |
| Response time: 500 μ S (measured value) |
| S2 RS485 interface, TC ASCII protocol |
| M1 RS232 interface, Modbus RTU protocol |
| M2 RS485 interface, Modbus RTU protocol |
| Power specification V0 100-240V AC (50/60Hz) |
){kind=link}