After-sales Service: | Following Updating |
---|---|
Warranty: | Under Discussion |
Transport Package: | Wooden Box |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.Product feature: PTFE cone antenna |
2.Typical applications: liquid, powder, and high hygiene level occasions |
3.Typical applications: in liquids, powders, and high hygiene environments, where crystallization, condensation, and adhesion of oil fumes and dust are common |
4.Measurement range: 40 meters |
5.Antenna material: PTFE (optional) |
6.Accuracy: ± 5mm |
7.Process temperature: -40~260 ºC |
8.Process pressure: -0.1~4.0Mpa |
9.Power supply: 24vDC (two wire, four wire) |
10.Signal output: 4-20mA/Har (two wire/four wire) RS485/Modbus |
11.Process connection: flange (≥ DN50 optional) |
12.Protection level: IP67 |
13.Frequency range: 26GHz |
14.Explosion proof level: Exia IIC T6 Ga/Exd ia IIC T6 Gb |
15.On site display: LED (standard) |
16.Cable entry: M20 * 1.5,? NPT (optional) |
17.Shell material: cast aluminum, 304 stainless steel (optional) |
1.The antenna size is small and easy to install; Non contact radar, without wear and pollution. |
2.Almost not affected by corrosion and foam; Almost unaffected by changes in water vapor, temperature, and pressure in the atmosphere. |
3.The small beam angle and concentrated energy enhance the echo capability while also helping to avoid interference. |
4.The measurement blind spot is smaller, and good results can also be achieved for small tank measurements. |
5.High signal-to-noise ratio, even in fluctuating situations, can achieve better performance. |
6.It adopts advanced microprocessors and unique EchoDiscovery echo processing technology, which can be applied to various complex working conditions. |