After-sales Service: | Following Updating |
---|---|
Warranty: | Under Discussion |
Supply Voltage: | 9V~30V |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.Speed up to 640 sec/trip |
2.TEDS optional |
3. High accuracy |
4.Digital and weight calibration with up to 5 points of correction |
5.Display switching: Gross weight, Net weight, Peak, Valley, Peak-Valley. |
6.Unit switching: 8, kg, I, N |
7.Two alarms (upper, middle and lower) are standard. |
8.Alarm mode: measured value alarm, peak alarm (default). |
9.Automatic peak clearing (keep the last peak value) |
Supply Voltage | 9V~30V |
Input sensitivity | 0.4mV/V~6mV/V |
Display Window | Single row 5-digit LED high brightness display (0.56") |
Sensor excitation voltage | 5VDC±2%,100mA (up to 6 3500 sensors) |
A/D Performance | 24-bit, Delta-Sigma method |
Display Accuracy | 1/10000 |
Output Rate | 10, 40, 640 times/sec |
Operating Temperature | -30°C-60°C |
Withstanding Voltage | 1 minute at 2000V AC50/60Hz |
Protection class | P65 (front part of product) |
Ambient environment | Temperature: -10~55ºC;Storage -25~65ºC;Humidity: 35~85%RH:Storage 35~85%RH |
Switching Output | 2 points, 250VAC/3A resistive loads |
CPR820 | basic type | ||
-C1 | RS232 (supports Modbus RTU protocol and free protocol) | ||
-C2 | RS485 (support Modbus RTU protocol and free protocol, up to 32 contacts in parallel) | ||
-A1 | Analog output (0±10V, 0~20mA, 4~20mA; resolution 1/3000) | ||
-1 | No suffix: TEDS (batch order). | ||
C1:TEDS+RS232 | |||
-C2:TEDS+RS232 | |||
A1:TEDS+analog output |