Input specifications |
Measure and control speed 10 times/second |
Basic error ± 0.05% F.S |
Display range -19999~45000 |
Input signal current I 4-20mA, 0-10 mA, 0-20 mA |
Voltage V 0-5V DC, 1-5V DC |
Potentiometer W 500 Ω~10K Ω |
Digital filtering inertia; Average value; Moving average, etc |
Basic specifications
Power supply voltage AC power supply 100-240 V AC 50/60 Hz
AC/DC power supply 10-24V AC 50/60 Hz; 10-24V DC
Power consumption of AC power supply below 7 VA
AC/DC power supply AC: below 6 VA; DC: Below 5W
The allowable voltage variation range is 90~110% of the power supply voltage
Insulation impedance above 100M Ω (500 V DC MEGA reference)
Withstand voltage at 2000 V AC 50/60Hz for 1 minute
Anti interference IEC61000-4-2 (electrostatic discharge), Class III;
IEC61000-4-4 (Electrical Fast Transient Pulse Group), Class III;
IEC61000-4-5 (surge), Class III
Protection level IP65 (front part of the product)
The ambient temperature is -10~55 ºC; Storage -25~65 ºC
Humidity 35~85% RH; Save 35~85% RH
Optional accessory specifications
Contact input K 1 point external input, used for resetting
Contact output T1-T4 1-4 points, 250VAC/3A resistive load
Analog output
(Resolution 1/3000) A1 current output 4-20mA, 0-10mA, 0-20mA
A2 voltage output 0-5V, 1-5V
A3 voltage output 0-10V
Communication interface S1 TC ASCII protocol RS232 rate: 2400; 4800; 9600; nineteen thousand and two hundred
Address: 0-99
Response time: 500 μ S (measured value)
S2 TC ASCII protocol RS485
M1 Modbus RTU protocol RS232
M2 Modbus RTU protocol RS485
Print interface P hardware clock
External power supply B1 24V ± 5%, below 50mA
B1G 24V ± 5%, below 100mA
B2 12 ± 5%, below 50mA
B2G 12 ± 5%, below 100mA