| Pattern: | Cantilever Type |
|---|---|
| Transform Type: | Resistance Strain |
| Out-Wire: | 4-Wire |
|
Still deciding? Get samples of US$ 57.5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Description:
41E series bearing seat sensor is mainly installed under the bearing seat, can also be used in other structural forms, is the main measurement of a bearing seat bearing capacity of the special sensor sensor. The principle of structure is shear resistance strain sensor which is supported by the center at both ends. High quality alloy steel is used as elastomer and foil resistance strain gauge is used as sensitive switching element. The bearing seat is installed in the middle of the sensor, and the two ends of the sensor are fixed on the base. When the bearing seat is loaded, the load is transferred to the base through the shear elastic beam at both ends, and the strain proportional to the load is generated in the elastic beam, which is converted into the corresponding electrical signal through the strain gauge.
| range(t) | A | B | C | D | E | F | G | H | J | K | L | N | M | S | P | T |
| 50 | 450.0 | 120.0 | 130.0 | 105.0 | 298.0 | 398.0 | 68.0 | 75.0 | 40.0 | 80.0 | 11.0 | 26.0 | M20 | 25.5 | 30.0 | 36.0 |
| 100 | 500.0 | 140.0 | 143.0 | 118.0 | 336.0 | 444.0 | 80.0 | 90.0 | 44.0 | 90.0 | 130.0 | 30.0 | M24 | 28.5 | 36.0 | 45.0 |
| 150 | 560.0 | 160.0 | 158.0 | 133.0 | 372.0 | 500.0 | 94.0 | 102.0 | 44.0 | 90.0 | 150.0 | 33.0 | M24 | 32.0 | 36.0 | 45.0 |
| 200 | 620.0 | 180.0 | 175.0 | 150.0 | 400.0 | 560.0 | 114.0 | 110.0 | 44.0 | 90.0 | 160.0 | 33.0 | M24 | 32.0 | 36.0 | 45.0 |
| Type | Technical parameters |
Nominal load range |
500~200 |
| Power supply |
10~12 VDC |
Zero balance |
1.0±% of rated output |
| Analog output |
1.5±0.01mV/V |
Input resistance(Rlc) |
750±20Ω(ohms) |
Output resistance(Ro) |
700±5Ω(ohms) |
Insulation resistance |
≥5000 MΩ(Mege-Ohms) |
| Class precision |
0.05%FS |
| Effect of temperature |
0.02%FS/10ºC |
| Operating temperature |
-40~+85ºC |
| Safe Load Limit |
200% FS |
| Safety margin against yielding |
300% FS |
| Safety margin against breakage |
500% FS |
Material material |
(15%) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection type |
IP67/IP68 |
Company Profile
){kind=link}