Optional specifications |
Contact input K 1 point external input, used for resetting |
Alarm |
Output 160 × 80 size T1~T4 1-4 alarm relay outputs, both normally open and normally closed dual contact 250V AC/3A |
Resistive load |
96 x 96 size T1~T2 1-2 point alarm relay output, both normally open and normally closed dual contacts |
T3~T4 3-4 point alarm relay outputs, all of which are single normally open contacts |
96 × 48 size T1~T2 1-2 point alarm relay output, both normally open and normally closed dual contacts |
T3 3-point alarm relay output, single normally open contact |
T4 4-point alarm relay output, with the first 3 points being single normally open contacts, |
The fourth point is a normally open+normally closed dual contact |
(Note: This model has optional restrictions, please refer to the notes for details) |
72 x 72 size T1~T2 1-2 point alarm relay output, 1 point normally open+normally closed dual contact; 1-point normally open contact |
T3 3-point alarm relay output, 1 point is normally open+normally closed dual contact, and the other 2 points are single normally open contacts |
(Note: This model has optional restrictions, please refer to the notes for details) |
48 × 48 size T1~T2 1-2 alarm relay output, 1 point is normally open+normally closed contact, and the other point is normally open contact |
(Note: This model has optional restrictions, please refer to the notes for details) |
O alarm selection OC gate output (voltage should be less than 40V DC, current should be less than 40mA), omitting indicates alarm relay output |
Analog quantity |
Output A1 current output (4-20) mA, (0-10) mA, (0-20) mA photoelectric isolation, resolution: 1/3000, load capacity: 600 Ω |
A2 voltage output (0-5) V, (1-5) V |
A3 voltage output (0-10) V |
External supply |
Power supply B1 24V ± 5% below 50mA |
B2 12V ± 5% below 50mA |
B3 10V ± 5% below 50mA |
communication |
Interface S1 RS232 interface (limited to A and B sizes only) photoelectric isolation, |
Response time: less than 500 μ S (measured value) |
Communication protocol selected through software |
(TCASCII or Modbus RTU) |
S2 RS485 interface |